Specification Sheet / Product Data
Side view (half section) and end view. Labels as in the PBH catalogue: L overall length, B ring-groove spacing, W ring-groove width, D outer diameter, D1 ring-groove diameter, dr shaft (bore) diameter. Dimensions in mm.
| Dimensions | |
|---|---|
| Part number | LM 20LUU |
| Shaft diameter (d) | 20 mm |
| Outer diameter (D) | 32 mm |
| Length (L) | 80 mm |
| Ring-groove spacing (B) | 61 mm |
| Groove width (W) | 1.6 mm |
| Groove diameter (D1) | 30.5 mm |
| Load & construction | |
|---|---|
| Basic dynamic load | 1,400 N |
| Basic static load | 2,740 N |
| Type | Long type, closed, double sealed (LUU) |
| Outer cylinder | Heat-treated steel |
| Ball retainer | Resin |
| Seals | Wiper seals on both sides |
| Fits shaft | Ø20 mm, e.g. MCS 20 |
Dimensions and basic load ratings are taken from the PBH catalogue.
Matching shaft
Use LM 20LUU with the Maxima hardened and ground shaft MCS 20. Any length from 100 mm to 2000 mm.
MCS 20
Maxima Hardened & Ground Linear Shaft, Ø20 mm, h7
Other 20 mm bearing types
Standard, open, flanged and housed versions for a 20 mm shaft.
Features & construction
- High precision and rigidity: solid steel outer cylinder with an industrial-strength resin ball retainer.
- Easy to fit: can be loaded from any direction.
- Easy to replace: standard LM dimensions and strict precision control, so it interchanges with other brands of the same size.
- Sealed on both sides: wiper seals keep dust out and hold the oil in.
The bearing has an outer cylinder, a ball retainer, balls and two end rings. The outer cylinder is heat treated for hardness and long travel life, and the end rings hold the retainer in place.
Need help choosing?
Not sure which bearing and shaft suit your application? Email ss@pbh.in or call +91 99736 03355.