Skip to Content

SFU 4005 with 1200mm Screw

[PBH Rolled Ball Screw]

₹ 13,570.00 ₹ 13,570.00 (Tax included)

  • End Machining
SFU 4005 Rolled Ball Screw.
Price Includes : 1Nut and 1Screw of 1200 mm Length
Smooth Motion, Long Operational Life
Diameter of Screw : 40 mm , Pitch : 5 mm
Rolled Ball Screw C7 Grade Positional Accuracy (.050/300 mm Travel)
Number of Circuits : 4
Dynamic Load Rating : 2110 Kgf
Static Load Rating : 7988 Kgf
Clearance in Axial Direction : .08 mm
Ball Screw End Machining Drawing
Ball Screw Ø40 · SFU4005
Supports: BK30 (fixed) & BF30 (floating)
Swipe the drawing sideways →
BK30 SIDE (FIXED)BF30 SIDE (FLOATING)Ball nutØ40 ball screwThreaded length = Total − 131110 (BK side total)E = 72F = 38S = 25E = 21F = 17.75 +0.2/0G = 1.75 +0.14/0(groove width)12345TOTAL LENGTH ________ mm10 mm margin
MACHINING SPECIFICATION
#FeatureSizeLength
BK30 side (lock nut RN30)
1Motor journalØ25 h738
2Lock-nut threadM30 × 1.525
3Bearing seatØ30 −0.008 / −0.01747
BF30 side (6206ZZ bearing, S30 snap ring)
4Bearing seatØ30 −0.008 / −0.01521
5Snap-ring grooveØ28.6 0/−0.2 × 1.75 +0.14at 17.75 +0.2
LENGTH CALCULATION
Machined ends = 110 (BK) + 21 (BF) = 131 mm
Threaded length = Total − 131
Travel = Total − 131 − Nut length − 10 (safety margin)
Total = Required travel + 131 + Nut length + 10 (safety margin)
Example (SFU4005-4, nut length 55 mm):
• If you order a 1000 mm long screw, the travel you will get = 1000 − 131 − 55 − 10 = 804 mm
• For a travel of 1000 mm, you need a screw 1000 + 131 + 55 + 10 = 1196 mm long
A 10 mm safety margin is already included, so the nut never runs into the end of the thread.
MODEL · NUT LENGTH
4005-4 · 55 mm
All dimensions in mm · Nut lengths for SFU flange nuts · General tolerance ISO 2768-m · Not to scale · Shaft ends suit BK30 / BF30 support units · Drg No. PBH-EM-40-BK30 · Rev B
Ball Screw End Machining Drawing
Ball Screw Ø40 · SFU4005
Supports: FK30 (fixed) & FF30 (floating)
Swipe the drawing sideways →
FK30 SIDE (FIXED)FF30 SIDE (FLOATING)Ball nutØ40 ball screwThreaded length = Total − 131110 (FK side total)E = 72F = 38S = 25E = 21F = 17.75 +0.2/0G = 1.75 +0.14/0(groove width)12345TOTAL LENGTH ________ mm10 mm margin
MACHINING SPECIFICATION
#FeatureSizeLength
FK30 side (lock nut RN30)
1Motor journalØ25 h738
2Lock-nut threadM30 × 1.525
3Bearing seatØ30 −0.008 / −0.01747
FF30 side (6206ZZ bearing, S30 snap ring)
4Bearing seatØ30 −0.008 / −0.01521
5Snap-ring grooveØ28.6 0/−0.2 × 1.75 +0.14at 17.75 +0.2
LENGTH CALCULATION
Machined ends = 110 (FK) + 21 (FF) = 131 mm
Threaded length = Total − 131
Travel = Total − 131 − Nut length − 10 (safety margin)
Total = Required travel + 131 + Nut length + 10 (safety margin)
Example (SFU4005-4, nut length 55 mm):
• If you order a 1000 mm long screw, the travel you will get = 1000 − 131 − 55 − 10 = 804 mm
• For a travel of 1000 mm, you need a screw 1000 + 131 + 55 + 10 = 1196 mm long
A 10 mm safety margin is already included, so the nut never runs into the end of the thread.
MODEL · NUT LENGTH
4005-4 · 55 mm
All dimensions in mm · Nut lengths for SFU flange nuts · General tolerance ISO 2768-m · Not to scale · Shaft ends suit FK30 / FF30 support units · Drg No. PBH-EM-40-FK30 · Rev B

Stroke calculator — which screw length do I need?

Type the travel you need. We add the machined ends, the nut and a 10 mm safety margin. Why? How long a screw do I need →

mm
Screw length required
1196 mm

Custom length — WhatsApp us
Standard length
1200 mm

View this length

SFU4005-4, nut length 55 mm. Travel = Total − machined ends − nut length − 10 mm margin. End machining is done after we receive your order.

Need a different length or end machining?

We cut screws to your length and machine the ends to your drawing — standard BK/BF and FK/FF ends or fully custom. Send us the length and drawing and we will send you a quote.

WhatsApp +91 99736 03355  ·  Email ss@pbh.in

PBH Rolled Ball ScrewLead accuracy grade C7
SFU 4005-4
PBHPrecision Bearing House®
Specification Sheet / Product Data
Dimensions (mm)
dNominal screw diameter40
lLead5
DaBall diameter3.175
DNut outer diameter (g6)63
AFlange outer diameter93
BFlange thickness14
LNut length55
WBolt circle (PCD)78
HFlange width across flats70
XMounting holes (thru)8 × Ø9
QOil holeM8

Side view

PBHB 14L 55ØA 93ØW 78ØD 63 g6Ød 40

Flange end view (hole pattern schematic)

Oil hole M88 × Ø9 thruH 70
Load Rating
Dynamic load rating Ca2,110 kgf
Static load rating Coa7,988 kgf
Number of circuits1 × 4
Rigidity63 kgf/µm
Accuracy
Lead accuracy (C7)±0.05 mm / 300 mm
Axial play (P0, max.)0.08 mm
Screw manufactureRolled, right-hand
Nut typeFlanged single nut (SFU)
Features
Smooth, low-noise operation
High efficiency
End machining to order (BK/BF, FK/FF)
Cut to required length
All dimensions in mm. Load ratings, rigidity and weight are catalogue values for the nut shown; specifications may change without notice.
!

IMPORTANT — Read before you fit or order your ball screw

Never pull the sleeve off the nut early — the balls will fall out. Tap a topic to open it in our FAQ.

Structure

The PBH series Rolled Ball Screw is a precision screw shaft with a helical groove formed by a high-accuracy cold rolling process.

Its screw groove and nut raceway are precisely matched, allowing a large number of hardened steel balls to circulate smoothly between them.

This rolling contact design drastically reduces friction compared to sliding mechanisms, providing high efficiency and repeatable accuracy.

The PBH ball screw's compact design ensures high load capacity, long service life, and quiet, vibration free motion.

Technical Advantages

  • High transmission efficiency
  • Excellent positioning accuracy
  • Smooth and low-friction movement
  • Long service life and durability.

Applications

  • CNC machinery & machining centres
  • 3D printers and laser engravers
  • Automation and robotics systems
  • Pick-and-place machines
  • Injection molding and packaging machines
  • Semiconductor production equipment
  • Measuring and testing devices
  • Linear actuators and lifting mechanisms