Skip to Content

SFU 3205 with 1390mm Screw

[PBH Rolled Ball Screw]

₹ 11,516.80 ₹ 11,516.80 (Tax included)

  • End Machining
SFU 3205 Rolled Ball Screw.
Price Includes : 1Nut and 1Screw of 1390 mm Length
Smooth Motion, Long Operational Life
Diameter of Screw : 32 mm , Pitch : 5 mm
Rolled Ball Screw C7 Grade Positional Accuracy (.050/300 mm Travel)
Number of Circuits : 4
Dynamic Load Rating : 1922 Kgf
Static Load Rating : 6343 Kgf
Clearance in Axial Direction : .08 mm
Ball Screw End Machining Drawing
Ball Screw Ø32 · SFU3205
Supports: BK25 (fixed) & BF25 (floating)
Swipe the drawing sideways →
BK25 SIDE (FIXED)BF25 SIDE (FLOATING)Ball nutØ32 ball screwThreaded length = Total − 11696 (BK side total)E = 66F = 30S = 20E = 20F = 16.35 +0.2/0G = 1.35 +0.14/0(groove width)12345TOTAL LENGTH ________ mm10 mm margin
MACHINING SPECIFICATION
#FeatureSizeLength
BK25 side (lock nut RN25)
1Motor journalØ20 h730
2Lock-nut threadM25 × 1.520
3Bearing seatØ25 −0.008 / −0.01746
BF25 side (6205ZZ bearing, S25 snap ring)
4Bearing seatØ25 −0.008 / −0.01520
5Snap-ring grooveØ23.9 0/−0.2 × 1.35 +0.14at 16.35 +0.2
LENGTH CALCULATION
Machined ends = 96 (BK) + 20 (BF) = 116 mm
Threaded length = Total − 116
Travel = Total − 116 − Nut length − 10 (safety margin)
Total = Required travel + 116 + Nut length + 10 (safety margin)
Example (SFU3205-4, nut length 52 mm):
• If you order a 1000 mm long screw, the travel you will get = 1000 − 116 − 52 − 10 = 822 mm
• For a travel of 1000 mm, you need a screw 1000 + 116 + 52 + 10 = 1178 mm long
A 10 mm safety margin is already included, so the nut never runs into the end of the thread.
MODEL · NUT LENGTH
3205-4 · 52 mm
All dimensions in mm · Nut lengths for SFU flange nuts · General tolerance ISO 2768-m · Not to scale · Shaft ends suit BK25 / BF25 support units · Drg No. PBH-EM-32-BK25 · Rev B
Ball Screw End Machining Drawing
Ball Screw Ø32 · SFU3205
Supports: FK25 (fixed) & FF25 (floating)
Swipe the drawing sideways →
FK25 SIDE (FIXED)FF25 SIDE (FLOATING)Ball nutØ32 ball screwThreaded length = Total − 126106 (FK side total)E = 76F = 30S = 20E = 20F = 16.35 +0.2/0G = 1.35 +0.14/0(groove width)12345TOTAL LENGTH ________ mm10 mm margin
MACHINING SPECIFICATION
#FeatureSizeLength
FK25 side (lock nut RN25)
1Motor journalØ20 h730
2Lock-nut threadM25 × 1.520
3Bearing seatØ25 −0.008 / −0.01756
FF25 side (6205ZZ bearing, S25 snap ring)
4Bearing seatØ25 −0.008 / −0.01520
5Snap-ring grooveØ23.9 0/−0.2 × 1.35 +0.14at 16.35 +0.2
LENGTH CALCULATION
Machined ends = 106 (FK) + 20 (FF) = 126 mm
Threaded length = Total − 126
Travel = Total − 126 − Nut length − 10 (safety margin)
Total = Required travel + 126 + Nut length + 10 (safety margin)
Example (SFU3205-4, nut length 52 mm):
• If you order a 1000 mm long screw, the travel you will get = 1000 − 126 − 52 − 10 = 812 mm
• For a travel of 1000 mm, you need a screw 1000 + 126 + 52 + 10 = 1188 mm long
A 10 mm safety margin is already included, so the nut never runs into the end of the thread.
MODEL · NUT LENGTH
3205-4 · 52 mm
All dimensions in mm · Nut lengths for SFU flange nuts · General tolerance ISO 2768-m · Not to scale · Shaft ends suit FK25 / FF25 support units · Drg No. PBH-EM-32-FK25 · Rev B

Stroke calculator — which screw length do I need?

Type the travel you need. We add the machined ends, the nut and a 10 mm safety margin. Why? How long a screw do I need →

mm
Screw length required
1178 mm

Custom length — WhatsApp us
Standard length
1190 mm

View this length

SFU3205-4, nut length 52 mm. Travel = Total − machined ends − nut length − 10 mm margin. End machining is done after we receive your order.

Need a different length or end machining?

We cut screws to your length and machine the ends to your drawing — standard BK/BF and FK/FF ends or fully custom. Send us the length and drawing and we will send you a quote.

WhatsApp +91 99736 03355  ·  Email ss@pbh.in

PBH Rolled Ball ScrewLead accuracy grade C7
SFU 3205-4
PBHPrecision Bearing House®
Specification Sheet / Product Data
Dimensions (mm)
dNominal screw diameter32
lLead5
DaBall diameter3.175
DNut outer diameter (g6)50
AFlange outer diameter80
BFlange thickness12
LNut length52
WBolt circle (PCD)65
HFlange width across flats62
XMounting holes (thru)6 × Ø9
QOil holeM6

Side view

PBHB 12L 52ØA 80ØW 65ØD 50 g6Ød 32

Flange end view (hole pattern schematic)

Oil hole M66 × Ø9 thruH 62
Load Rating
Dynamic load rating Ca1,922 kgf
Static load rating Coa6,343 kgf
Number of circuits1 × 4
Rigidity54 kgf/µm
Accuracy
Lead accuracy (C7)±0.05 mm / 300 mm
Axial play (P0, max.)0.08 mm
Screw manufactureRolled, right-hand
Nut typeFlanged single nut (SFU)
Features
Smooth, low-noise operation
High efficiency
End machining to order (BK/BF, FK/FF)
Cut to required length
All dimensions in mm. Load ratings, rigidity and weight are catalogue values for the nut shown; specifications may change without notice.
!

IMPORTANT — Read before you fit or order your ball screw

Never pull the sleeve off the nut early — the balls will fall out. Tap a topic to open it in our FAQ.

Structure

The PBH series Rolled Ball Screw is a precision screw shaft with a helical groove formed by a high-accuracy cold rolling process.

Its screw groove and nut raceway are precisely matched, allowing a large number of hardened steel balls to circulate smoothly between them.

This rolling contact design drastically reduces friction compared to sliding mechanisms, providing high efficiency and repeatable accuracy.

The PBH ball screw's compact design ensures high load capacity, long service life, and quiet, vibration free motion.

Technical Advantages

  • High transmission efficiency
  • Excellent positioning accuracy
  • Smooth and low-friction movement
  • Long service life and durability.

Applications

  • CNC machinery & machining centres
  • 3D printers and laser engravers
  • Automation and robotics systems
  • Pick-and-place machines
  • Injection molding and packaging machines
  • Semiconductor production equipment
  • Measuring and testing devices
  • Linear actuators and lifting mechanisms