Skip to Content

SFU 2505 with 1360mm Screw

[PBH Rolled Ball Screw]

₹ 7,516.60 ₹ 7,516.60 (Tax included)

  • End Machining
SFU 2505 Rolled Ball Screw.
Price Includes : 1Nut and 1Screw of 1360 mm Length
Smooth Motion, Long Operational Life
Diameter of Screw : 25 mm , Pitch : 5 mm
Rolled Ball Screw C7 Grade Positional Accuracy (.050/300 mm Travel)
Number of Circuits : 4
Dynamic Load Rating : 1724 Kgf
Static Load Rating : 4904 Kgf
Clearance in Axial Direction : .08 mm
Ball Screw End Machining Drawing
Ball Screw Ø25 · SFU2505
Supports: BK17 (fixed) & BF17 (floating)
Swipe the drawing sideways →
BK17 SIDE (FIXED)BF17 SIDE (FLOATING)Ball nutØ25 ball screwThreaded length = Total − 9276 (BK side total)E = 53F = 23S = 17E = 16F = 13.15 +0.2/0G = 1.15 +0.14/0(groove width)12345TOTAL LENGTH ________ mm10 mm margin
MACHINING SPECIFICATION
#FeatureSizeLength
BK17 side (lock nut RN17)
1Motor journalØ15 h723
2Lock-nut threadM17 × 117
3Bearing seatØ17 −0.008 / −0.01536
BF17 side (6203ZZ bearing, S17 snap ring)
4Bearing seatØ17 −0.008 / −0.01516
5Snap-ring grooveØ16.2 0/−0.2 × 1.15 +0.14at 13.15 +0.2
LENGTH CALCULATION
Machined ends = 76 (BK) + 16 (BF) = 92 mm
Threaded length = Total − 92
Travel = Total − 92 − Nut length − 10 (safety margin)
Total = Required travel + 92 + Nut length + 10 (safety margin)
Example (SFU2505-4, nut length 51 mm):
• If you order a 1000 mm long screw, the travel you will get = 1000 − 92 − 51 − 10 = 847 mm
• For a travel of 1000 mm, you need a screw 1000 + 92 + 51 + 10 = 1153 mm long
A 10 mm safety margin is already included, so the nut never runs into the end of the thread.
MODEL · NUT LENGTH
2505-4 · 51 mm
All dimensions in mm · Nut lengths for SFU flange nuts · General tolerance ISO 2768-m · Not to scale · Shaft ends suit BK17 / BF17 support units · Drg No. PBH-EM-25-BK17 · Rev B
Ball Screw End Machining Drawing
Ball Screw Ø25 · SFU2505
Supports: FK17 (fixed) & FF17 (floating)
Swipe the drawing sideways →
FK17 SIDE (FIXED)FF17 SIDE (FLOATING)Ball nutØ25 ball screwThreaded length = Total − 9781 (FK side total)E = 58F = 23S = 15E = 16F = 13.15 +0.2/0G = 1.15 +0.14/0(groove width)12345TOTAL LENGTH ________ mm10 mm margin
MACHINING SPECIFICATION
#FeatureSizeLength
FK17 side (lock nut RN17)
1Motor journalØ15 h723
2Lock-nut threadM17 × 115
3Bearing seatØ17 −0.008 / −0.01543
FF17 side (6203ZZ bearing, S17 snap ring)
4Bearing seatØ17 −0.008 / −0.01516
5Snap-ring grooveØ16.2 0/−0.2 × 1.15 +0.14at 13.15 +0.2
LENGTH CALCULATION
Machined ends = 81 (FK) + 16 (FF) = 97 mm
Threaded length = Total − 97
Travel = Total − 97 − Nut length − 10 (safety margin)
Total = Required travel + 97 + Nut length + 10 (safety margin)
Example (SFU2505-4, nut length 51 mm):
• If you order a 1000 mm long screw, the travel you will get = 1000 − 97 − 51 − 10 = 842 mm
• For a travel of 1000 mm, you need a screw 1000 + 97 + 51 + 10 = 1158 mm long
A 10 mm safety margin is already included, so the nut never runs into the end of the thread.
MODEL · NUT LENGTH
2505-4 · 51 mm
All dimensions in mm · Nut lengths for SFU flange nuts · General tolerance ISO 2768-m · Not to scale · Shaft ends suit FK17 / FF17 support units · Drg No. PBH-EM-25-FK17 · Rev B

Stroke calculator — which screw length do I need?

Type the travel you need. We add the machined ends, the nut and a 10 mm safety margin. Why? How long a screw do I need →

mm
Screw length required
1153 mm

Custom length — WhatsApp us
Standard length
1160 mm

View this length

SFU2505-4, nut length 51 mm. Travel = Total − machined ends − nut length − 10 mm margin. End machining is done after we receive your order.

Need a different length or end machining?

We cut screws to your length and machine the ends to your drawing — standard BK/BF and FK/FF ends or fully custom. Send us the length and drawing and we will send you a quote.

WhatsApp +91 99736 03355  ·  Email ss@pbh.in

PBH Rolled Ball ScrewLead accuracy grade C7
SFU 2505-4
PBHPrecision Bearing House®
Specification Sheet / Product Data
Dimensions (mm)
dNominal screw diameter25
lLead5
DaBall diameter3.175
DNut outer diameter (g6)40
AFlange outer diameter62
BFlange thickness10
LNut length51
WBolt circle (PCD)51
HFlange width across flats48
XMounting holes (thru)6 × Ø6.6
QOil holeM6

Side view

PBHB 10L 51ØA 62ØW 51ØD 40 g6Ød 25

Flange end view (hole pattern schematic)

Oil hole M66 × Ø6.6 thruH 48
Load Rating
Dynamic load rating Ca1,724 kgf
Static load rating Coa4,904 kgf
Number of circuits1 × 4
Rigidity45 kgf/µm
Accuracy
Lead accuracy (C7)±0.05 mm / 300 mm
Axial play (P0, max.)0.08 mm
Screw manufactureRolled, right-hand
Nut typeFlanged single nut (SFU)
Features
Smooth, low-noise operation
High efficiency
End machining to order (BK/BF, FK/FF)
Cut to required length
All dimensions in mm. Load ratings, rigidity and weight are catalogue values for the nut shown; specifications may change without notice.
!

IMPORTANT — Read before you fit or order your ball screw

Never pull the sleeve off the nut early — the balls will fall out. Tap a topic to open it in our FAQ.

Structure

The PBH series Rolled Ball Screw is a precision screw shaft with a helical groove formed by a high-accuracy cold rolling process.

Its screw groove and nut raceway are precisely matched, allowing a large number of hardened steel balls to circulate smoothly between them.

This rolling contact design drastically reduces friction compared to sliding mechanisms, providing high efficiency and repeatable accuracy.

The PBH ball screw's compact design ensures high load capacity, long service life, and quiet, vibration free motion.

Technical Advantages

  • High transmission efficiency
  • Excellent positioning accuracy
  • Smooth and low-friction movement
  • Long service life and durability.

Applications

  • CNC machinery & machining centres
  • 3D printers and laser engravers
  • Automation and robotics systems
  • Pick-and-place machines
  • Injection molding and packaging machines
  • Semiconductor production equipment
  • Measuring and testing devices
  • Linear actuators and lifting mechanisms