Skip to Content

PGW35CC

PBH Linear Guide · Flange block, size 35 · Hiwin HGW35CC compatible

The PGW35CC is a wide flange-type size 35 linear guide block that can be bolted from the top or the bottom. Its four-row ball design carries equal load in all directions, and its self-aligning design absorbs small installation errors for smooth, long-lasting linear motion.

  • 4-row even load design
  • Self-aligning, smooth and low noise
  • Equivalent & Compatible with Hiwin HGW35CC

Use with the PBR35 linear guide rail (sold separately). Calculate your rail length.

Linear Block
₹ 2,596.00 ₹ 2,596.00 (Tax included)

PGW35CC: wide flange size 35 linear guide block with 4-row even load design, equivalent and compatible with Hiwin HGW35CC. Use with PBR35 rail.
49.52 kNDynamic load C
103 kNStatic load C₀
4-roweven-load design

Matching rail: PBR35

PBR35 linear guide rail

The PGW35CC runs on the PBR35 rail: 34 mm wide, 80 mm hole pitch, M8×25 bolts. Rails are sold by length, so choose yours on the rail page.

Choose PBR35 rail length

Alternative block: PGH35CA

PGH35CA compact linear guide block

Prefer a compact, narrow block? The PGH35CA is bolted from the top and has the same size 35 load ratings.

incl. GST
View details

Specification Sheet / Product Data

PBH Linear GuideBlock PGW35CCRail PBR35

Cross-section

W B B₁ H H₄ H₅H₆ H₂ H₁ W₂W₁W₂ W₃ C₂GW₅

Side view

L L₁ C d₁×d₂×h₁ EP L₃H₃
48 mmAssembled height H
111.5 mmBlock length L
100 mmBlock width W
82 × 62 mmMounting hole spacing B × C
M10Flange mounting thread
Assembly (mm)
HOverall height48
H₂Rail bottom to block bottom7.5
W₂Rail edge to block edge33
Rail dimensions (mm)
W₁Rail width34
H₁Rail height29
d₁×d₂×h₁Rail hole (counterbore)14×9×12
PHole pitch80
ERail end to first hole30
C₂1.5
W₃23.8
Mounting boltBolt for railM8×25
Static moment
Static moment MA1.2 kN·m
Static moment MB1.2 kN·m
Static moment MC1.73 kN·m
Block dimensions (mm)
WBlock width100
BMounting hole spacing, across82
B₁Block side to mounting hole centre9
CMounting hole spacing, along62
L₁Block body length80
LOverall block length111.5
L₃Grease nipple projection12
GFlange mounting threadM10
H₃Block top to end-cap screw centre12.6
H₄Block top to grease nipple centre9
H₅10.1
H₆Flange thickness18
W₅1.1
Load rating
Basic dynamic load rating C49.52 kN
Basic static load rating C₀103 kN
Schematic drawings, not to scale. Symbols in the tables refer to the drawings. Block material 20CrMo, rail S55C, balls GCr15. All dimensions in mm; specifications may change without notice.

Need a rail for this block?

Enter the rail length you need and see the standard PBR35 length, price and drawing, or send us an enquiry for a cut-to-length rail. Open the PBR35 rail length calculator

Other sizes

!

IMPORTANT — Read before you fit or order your linear guide

Check mounting, lubrication and rail length before you fit. Tap a topic to open it in our FAQ.

Features

PBH Linear Guide

High Rigidity & Precision

Our linear guides offer exceptional stiffness and positioning accuracy up to 0.01mm. This ensures stable, repeatable motion critical for high-performance machinery.

Self-Aligning Capability

The unique raceway design allows the guide to automatically compensate for minor installation errors and shaft misalignments, simplifying the assembly process.

Enhanced Durability

Constructed from premium-grade GCr15 steel, our guides are highly resistant to wear and can withstand heavy dynamic and static loads for a long operational life.