Specification Sheet / Product Data
| Shaft | |
|---|---|
| Part number | MCS 50 |
| Diameter | 50 mm |
| Tolerance | h7 (-0 / -25 µm) |
| Lengths | 100-2000 mm online, 100 mm steps |
| Longest shaft | 3000 mm (quote on request) |
| Material & finish | |
|---|---|
| Material | S45C carbon steel |
| Hardness | HRC 55-60 |
| Hardened depth | 0.8 mm to 3 mm |
| Surface | Ground, chrome plated |
| Used for | Linear bearings, pneumatic, hydraulic |
Suitable linear bearings
LM 50UU, LM 50LUU, LMF 50UU, LMF 50LUU, LMK 50UU, LMK 50LUU, LMH 50UU, LMH 50LUU, SC 50UU, SC 50LUU. Browse linear bearings
Need end machining or a longer shaft?
You can order any length from 100 mm to 2000 mm online. MCS 50 shafts are available up to 3000 mm. For lengths above 2000 mm, please email us at ss@pbh.in for a quote.
We machine shafts in-house: tapping, threading, drilling, steps, keyways, snap ring grooves and chamfering.
Email your drawing to ss@pbh.in for a quote.
Other sizes
Tolerance by diameter (h7)
| Part number | Diameter | Tolerance |
|---|---|---|
| MCS 6 | 6 mm | -0 / -12 µm |
| MCS 8 | 8 mm | -0 / -15 µm |
| MCS 10 | 10 mm | -0 / -15 µm |
| MCS 12 | 12 mm | -0 / -18 µm |
| MCS 13 | 13 mm | -0 / -18 µm |
| MCS 16 | 16 mm | -0 / -18 µm |
| MCS 20 | 20 mm | -0 / -21 µm |
| MCS 25 | 25 mm | -0 / -21 µm |
| MCS 30 | 30 mm | -0 / -21 µm |
| MCS 35 | 35 mm | -0 / -25 µm |
| MCS 40 | 40 mm | -0 / -25 µm |
| MCS 50 | 50 mm | -0 / -25 µm |
| MCS 60 | 60 mm | -0 / -30 µm |
Features
Maxima Hardened & Ground Shaft
Precision Ground, h7 Tolerance
Ground to h7 for a smooth, close fit with linear bearings, giving quiet and accurate linear motion.
Hardened for Long Life
Case hardened to HRC 55-60 (0.8 to 3 mm deep) so the surface resists wear while the core stays tough.
Chrome Plated
Chrome plating protects the shaft against corrosion and keeps the surface smooth over many cycles.
Cut and Machined to Your Need
Any length from 100 to 2000 mm online, up to 3000 mm on quote, plus in-house end machining to your drawing.