Skip to Content

LM 25UU OP

  • Shaft Ø25 mm, outer Ø40 mm, length 59 mm
  • Open slot, opening angle 50°, double wiper seals
  • Basic load: 980 N dynamic, 1,570 N static
  • Fits Maxima shaft MCS 25
₹ 342.20 ₹ 342.20 (Tax included)

Maxima LM 25UU OP open type linear ball bearing: 25 mm bore, 40 mm OD, 59 mm long. Dynamic load 980 N, static 1,570 N. Buy online at PBH.

Specification Sheet / Product Data

25 mmShaft diameter
40 mmOuter diameter
59 mmLength
12 mmOpening width (h1)
980 NBasic dynamic load
1,570 NBasic static load
Maxima Linear Bearing LM 25UU OPOpen type, steel outer cylinder, resin retainer, double wiper seals
L = 59B = 41W = 1.85W = 1.85D = 40D1 = 38dr = 25dr = 2550°h1 = 12D = 40LM 25UU OPEnd view

Side view (half section) and end view. Labels as in the PBH catalogue: L overall length, B ring-groove spacing, W ring-groove width, D outer diameter, D1 ring-groove diameter, dr shaft (bore) diameter, h1 opening width, with the opening angle. Dimensions in mm.

Dimensions
Part numberLM 25UU OP
Shaft diameter (d)25 mm
Outer diameter (D)40 mm
Length (L)59 mm
Ring-groove spacing (B)41 mm
Groove width (W)1.85 mm
Groove diameter (D1)38 mm
Opening width (h1)12 mm
Opening angle50°
Load & construction
Basic dynamic load980 N
Basic static load1,570 N
TypeOpen type, double sealed (UU-OP)
Outer cylinderHeat-treated steel
Ball retainerResin
SealsWiper seals on both sides
Fits shaftØ25 mm, e.g. MCS 25

Dimensions and basic load ratings are taken from the PBH catalogue.

Matching shaft

Use LM 25UU OP with the Maxima hardened and ground shaft MCS 25. Any length from 100 mm to 2000 mm.

MCS 25 shaft

MCS 25
Maxima Hardened & Ground Linear Shaft, Ø25 mm, h7

Other 25 mm bearing types

Other versions: standard, long, open, flanged and housed types for a 25 mm shaft.

LM 25UU linear bearing

LM 25UU
Maxima Linear Bearing

incl. GST
View details
LM 25LUU linear bearing

LM 25LUU
Maxima Linear Bearing, Long Type

incl. GST
View details
LMF 25UU linear bearing

LMF 25UU
Maxima Linear Bearing with Round Flange

incl. GST
View details
LMK 25UU linear bearing

LMK 25UU
Maxima Linear Bearing with Square Flange

incl. GST
View details
LMH 25UU linear bearing

LMH 25UU
Maxima Linear Bearing with Oval Flange

incl. GST
View details

Features & construction

  • High precision and rigidity: solid steel outer cylinder with an industrial-strength resin ball retainer.
  • Open slot: the opening along the bearing lets it run on a shaft held by a continuous support, so long shafts do not sag.
  • Easy to replace: standard LM dimensions and strict precision control, so it interchanges with other brands of the same size.
  • Sealed on both sides: wiper seals keep dust out and hold the oil in.

The bearing has an outer cylinder, a ball retainer, balls and two end rings. The outer cylinder is heat treated for hardness and long travel life, and the end rings hold the retainer in place.

Need help choosing?

Not sure which bearing and shaft suit your application? Email ss@pbh.in or call +91 99736 03355.

Other sizes